Joint Service Imagery Processing System - NavyPART IV - TRAINING, LOGISTICS SUPPORT REQUIREMENTS
The following charts are not included in Part IVChart Title Explanation
IV.A.2 Test Equipment - General Purpose/ No Requirement. The Imagery Dissemination
Special Purpose/Special Tools Manager Course, CIN J-150-2973 is the only
new training course required to support JSIPS-N
requirements. Remaining training requirements
are merged into existing courses at NMITC.
IV.A.3 Electronic Test Equipment - General Purpose/ No Requirement
Special Purpose
IV.A.5 Training Devices No Requirement.
IV.B.1 Training Services No Requirement.
IV.B.3 Training Aids No Requirement.
IV.C.1 Facility Requirements Summary Classroom and lab space is available at NMITC
to support the training courses identified in Part I
of this NTP.
IV.C.2 Facility Requirements Detailed by Required information for the JSIPS-N
Activity by Course Dissemination Manager Course is detailed in
Equipment Facility Requirements (EFR-A-0015).
IV.C.3 Facility Project Summary by Program No Requirements for MILCON as sufficient
space is available for TTE presently in place. No
new construction is anticipated for future
requirements at this time.
IV.A. Training Hardware Requirements
IV.A.1. Technical Training Equipment
Activity: Navy and Marine Corps Intelligence Training Center (NMITC) Dam Neck, VA
UIC: 49441
Item System Qty Date RFT
Course Number Equipment Reqd Reqd Date
Imagery Dissemination 001 DIWSA (AN/SYQ-18) 001 Complete 09/94
Manager (J-150-2973) (Note 1)
002 DIWSA (AN/SYQ-18A) 001 Complete 3rd Qtr
(Note 1) FY-98
003 NIS DE w/IESS 001 Complete 3rd Qtr
(OL-646/SYQ) FY-98
004 PTW/SPA 004 Complete 3rd Qtr
(OL-647/SYQ) FY-98
005 IPL 001 Complete 2nd Qtr
FY-99
006 TIS 001 FY-00 FY-00
Notes:
1. The DIWSA is utilized to support APS DIWSA operator training (J-243-2953) and maintenance (J-243-2951) training
described in the Afloat Systems NTP (A-00-9001C). The AN/SYQ-18 is installed in Room C243 and the
AN/SYQ-18A is installed in Room C244 at NMITC.
2. There are four PTW/SPA workstations installed in Room C246 at NMITC.
IV.A.1. Technical Training Equipment (cont.)
Activity: Navy Strike Air Warfare Center (NSAWC) Fallon, NV
UIC: 68847
Course Number Equipment Reqd Reqd Date
Strike Warfare 001 NIS DE w/IESS 001 Complete 2nd Qtr
School and BG (Ol-646/SYQ) FY-98
Advanced Team
Training 002 PTW/SPA 002 Complete 2nd Qtr
OL-647/SYQ) FY-98
003 IPL 001 FY-99 FY-99
004 TIS 001 Complete 1st Qtr
FY-99
Note:
1. Elements of JSIPS-N are co-located with APS equipment in imagery vans located at NSAWC Fallon. The APS/JSIPS-N
equipment is utilized to support the strike warfare school and BG advanced team training described in the current version of
the Afloat Systems NTP.
2. The TIS (prototype) is being used to support TIS land based testing.
IV.A.1. Technical Training Equipment (cont.)
Activity: Fleet Intelligence Training Center Pacific (FITCPAC) San Diego, CA
UIC: 0388A
Item System Qty Date RFT
Course Number Equipment Reqd Reqd Date
Delta/Refresher 001 PTW 002 Complete FY-97
Training
Note:
At the request of FITCPAC, PMA-281 has installed a TAC-4 based PTW to support both delta and refresher training
for personnel located in the San Diego area.
IV.A.4. Repair Parts for Technical Training Equipment
School/ Technical Type and
Course/Type Location Training Range of Date
of Training UIC Equipment Repair Parts Reqd
Imagery NMITC
Dissemination Dam Neck, VA
Manager UIC: 49441
Course
J-150-2973
Notes:
1. PMA-281 has devised a unique logistical support system to best support JSIPS-N equipment. This system entails minimizing
the inventory required to be placed at the site, while providing for a decrease in response time to the customer when a part is
required. In support of this concept, a Pack-Up-Kit (PUK) containing critical spares is provided to the site. The remainder of
the spares/repair parts are stored ashore at the Defense Depot in Memphis, TN.
2. PMA-281 maintains a home page on the world wide web to support the installed JSIPS-N equipment. Included on the homepage
is a Quick Reference Desk Guide that is intended to provide the user with procedures for utilizing the FedEx system and an
equipment catalog that provides a parts lists for JSIPS-N equipment. To access the Quick Reference Desk Guide for FedEx
orders or the equipment catalog, personnel should log on to PMA-281’s homepage at "http://www.tci.navy.mil/
3. Further information is provided in Section 4 of the APS/JSIPS-N User’s Logistics Support Summary (ULSS), CMP Publication
ULSS-PMA-281-002, Revision B dated 1 May 1997.
IV.B Initial Training Requirements
IV.B.2. Curricula Materials
School/ Type
Course/Type Location of Qty Date
of Training UIC Material Reqd Reqd
Imagery NMITC Instructor Guide 2 4th Qtr FY-98
Dissemination Dam Neck, VA Trainee Guide 12 4th Qtr FY-98
Manager UIC: 49441 Transparencies 2 Sets 4th Qtr FY-98
Course Student Tests 12 4th Qtr FY-98
J-150-2973 Course Critiques 12 4th Qtr FY-98
Notes:
1. An Ad-hoc factory based training course was conducted at NMITC during the period of 6 through 31 July 1998 utilizing
contractor formatted curriculum/training materials. These materials are being converted by SPAWARSYSCEN Philadelphia
utilizing MIL-PRF-29612 dated 26 September 1996 and NAVEDTRA 130 as a guide.
2. Following milestones were established at the JSIPS-N follow-on training in progress review conducted on 22 July 1998. See
Part I, Paragraph I.M.2 for additional information.
Milestone Completion Date Activity
Complete curriculum conversion Aug 98 NMITC
Final contractor training class 14 Sep 98 PMA-281
Pre-Pilot IPR 27 Oct 98 CNET/NMITC
Pilot Course CIN J-150-2973 Nov/Dec 98 NMITC
Post Pilot Review Feb/Mar 99 CNET
Letter of Promulgation TBD CNET
will be conducted at NMITC beginning on 11 January 1999.
IV.B.2. Curricula Materials (cont.)
School/ Type
Course/Type Location of Qty Date
of Training UIC Material Reqd Reqd
GCCS-M Afloat NMITC
System Dam Neck, VA
Administrator UIC: 0387A
Course
J-150-2955
Note:
1. This course of instruction is on-going at NMITC. Course is under the cognizance of CNET ETE 412.
2. A module addressing JSIPS-N unique system administration requirements has been developed by PMA-281 and
the C4I Programs Office Philadelphia.
3. An in progress review of curriculum/training materials being developed for the JSIPS-N System Administration module
was conducted at NMITC on 15-16 June 1998. Representatives from NMITC, PMA-281, C4I Programs Office Philadelphia
and support contractors were in attendance.
4. A second IPR was conducted on 1 September 1998 at NMITC to review curriculum/training materials. Representatives from NMITC, PMA-281, C4I Programs Office Philadelphia and support contractors were in attendance.
IV.B.2. Curricula Materials (cont.)
School/ Type
Course/Type Location of Qty Date
of Training UIC Material Reqd Reqd
Intelligence NMITC
Center Dam Neck, VA
Maintenance UIC: 0387A
Course
J-150-2019
Note:
1. This course of instruction is on-going at NMITC. Course is under the cognizance of CNET ETE412.
2. PMA-281 has submitted a proposal to migrate JSIPS-N maintenance training from the 1676 APS Maintenance Course CIN
J-243-2951 into the 1654 Intelligence Center Maintenance Course, CIN J-150-2019. Refer to Part I, Paragraph I.M.2
of this NTP for more information.
IV.B.4. Technical Manuals
School/ Technical
Course/Type Location Manual & Qty Date
of Training UIC Number Medium Reqd Reqd
Imagery NMITC Various Hardcopy/ 8 Sets 4th Qtr FY-98
Dissemination Dam Neck, VA (Notes 1 & 2) On-Line/
Manager UIC: 49441 CD-ROM
Course
GCCS-M Afloat NMITC Various Hardcopy/ 8 Sets 4th Qtr FY-98
System Dam Neck, VA (Note 1 & 2) On-Line/
Administration UIC: 0387A CD-ROM
Course
J-150-2955
Intelligence NMITC Various Hardcopy/ 8 Sets TBD
Center Dam Neck, VA (Notes 1 & 2) On-Line/
Maintenance UIC: 0387A CD-ROM
Course
Notes:
1. Technical manuals for these courses consists of system operators manuals, computer system operator manuals, software/ system user’s manuals, equipment technical manuals and maintenance manuals. For the most part, these manuals are provided as hardcopy manuals. However, some of these manuals (DE) will be provided on CD-ROM as on-line documents.
2. A complete listing of APS/JSIPS-N technical manuals is provided in Section 7 of the APS/JSIPS-N User’s Logistics Support
Summary (ULSS), CMP Publication ULSS-PMA-281-002, Revision B dated 1 May 1997. C4I Programs Office Philadelphia
will provide NMITC with eight sets of technical manuals required to support the training courses identified above.
This page intentionally left blank