FM 101-5-1
Operational Terms and Graphics


Chapter 4
Unit Symbols


This chapter establishes a standard system for the development of ground unit symbols. These symbols are for use on situation maps, overlays, and annotated aerial photographs. This chapter applies to both automated and hand-drawn graphic displays or overlays.

This chapter includes a wide variety of unit symbols as well as modifiers for building new or unique symbols. Users should avoid using any symbols, or combinations and modifications of symbols, that differ from those in this manual. If the user, after searching doctrinal symbols and modifers, must create a new symbol, it must be explained in an accompanying legend.

The symbols shown in this chapter are adequate for depicting enemy units. When representing unorthodox units and equipment,select the most appropriate symbol contained herein.


ICON-BASED SYMBOLS

A symbol is composed of three components: a frame (geometric border), fill, and icon. Frames are geometric shapes used to display affiliation. Affiliation refers to whether the warfighting object being represented is a threat. The basic affiliation categories are friendly, unknown, neutral, and enemy. The unknown frame shape is normally used only for aircraft and ships. The frame shape for suspected friendly, enemy, or neutral is used for ground units not positively identified. The basic frame shapes for units, installations, activities, and logistics sites are shown in Figure 4-1.

Fill refers to the area within the frame. If color is used in a symbol, it shall indicate affiliation. Generally, black is used for the frame, icon, and modifiers when symbols are displayed on a light background. White is used for these elements when they are displayed on a dark background. A color fill can be used if an icon is displayed within the area of the frame. Figure 4-2, from MILSTD 2525A, shows the color defaults for affiliation used for hand-drawn and computer-generated symbols. The use of any other colors must be explained in an accompanying legend. Automated systems allow users to select other colors and to portray their meaning on the automated overlay display.

Affiliation Hand-Drawn Computer-Generated
Friend, Assumed Friend Blue Cyan
Unknown, Pending Yellow Yellow
Neutral Green Green
Enemy, Suspect, Joker, Faker Red Red

Figure 4-2. Color Defaults

The icon is a "role indicator" that shows the warfighting function the unit performs either on the ground, in the air, or at sea. An example is the crossed rifles which represent an infantry unit.

This manual does not include an example of every type of unit; however, users can see from those presented the pattern of construction in order to make symbols for new or unique units. Upon US Army and Marine Corps approval, MILSTD 2525A, Common Warfighting Symbology, will contain more approved ground unit symbols. Appendix A includes additional examples of friendly units. Appendix B includes examples of enemy units.


BUILDING UNIT SYMBOLS

Seven rules govern the building of unit symbols. They are:

  1. Existing standard symbols must be used whenever possible as building blocks for new symbols.
  2. Symbols must be usable in manual as well as automated modes.
  3. Symbols must be easily distinguishable.
  4. Friendly symbols must not use attributes that could be confused with enemy symbols.
  5. Symbols must be distinguishable without color. (Monochrome display.)
  6. Composite symbols will generally have the primary symbol centered on or below the modifying symbols.
  7. All unit symbols will be drawn or portrayed with the top of the symbol facing the top of the overlay (normally North is at the top). Orientation of the symbol will be accomplished by using the "Q" field for moving symbols or another graphic such as a battle position or support by fire position.

Normally, additional information needs to be included with the unit symbol and is placed in standardized unit labeling fields shown in Figure 4-3. The fields are defined in Figure 4-4. The unit location is determined by the center of mass of the symbol or a line (without an arrowhead) from the center of the bottom of the frame to the location. Headquarters unit locations are at the bottom of the "headquarters staff," displayed as field "S."

Figure 4-3. Standardized Unit Labeling Fields


Field Field Title Description Application Field Length
(characters)
A Symbol Frame, fill, and icon showing basic function of units, installations, or equipment with modifers A1,A2, and A3. All
B Size Indicator A symbol that denotes the size of a unit or installation (see Figure 4-5). Units and installations
C Equipment Indicates number of items present. Installation: Size in square feet. Units and installations 10
D Task Force A symbol placed over the size indicator to denote a task force or company team (see Figure 4-3). Units 6
E Suspect, Assumed Friend, Faker, Joker Question mark '?': suspect, assumed friend, faker. 'J': Joker. All 1
F Reinforced or Detached Shows (+) reinforced , (-) reduced, or (+-) reinforced and reduced. Units 3
G Staff Comments Free text. All 20
H Additional Information Free text. All 20
J Evaluation Rating One letter and one number (see STANAG 2022 ). Enemy only 2
K Combat Effectiveness Effectiveness of unit displayed. Units and installations 5
L Signature Equipment Indicated by "!" ( refers to detectable electronic signatures). Enemy equipment only 1
M Higher Formation Number or title of higher echelon command (corps designated by Roman numerals). All 21
N Enemy (Hostile) Indicated enemy by letters "ENY." Enemy equipment, lines, areas, and boundaries 3
P IFF/SIF Identification modes and codes. Units and equipment 5
Q Direction of Movement Arrow Direction symbol is moving or will move. Nuclear, biological, chemical: Downwind direction. All 4
R Mobility Indicator Pictorial representation of mobility. Equipment only
S Headquarters Staff Indicator/Locating Indicator Identifies unit symbol as a headquarters or used to indicate location or to declutter. Units
T Unique Designation An alphanumeric title that uniquely identifies a particular symbol; track number. Nuclear: Friendly delivery unit (missile, satellite, aircraft, etc). All 21
V Type of Equipment Identifies unique designation. Nuclear: Friendly weapons type. Units and equipment 24
W Date-Time Group Alphanumeric field for date/time (MILSTD-2500A)
(DDHHMMSSZMONYY) or "o/o" for on order.
All 15
X Altitude/Depth Altitude portion of GPS. Flight level for aircraft. Depth for submerged objects. Height in feet of equipment or structure on the ground. Nuclear: Height of burst. All 6
Y Location Latitude and longitude ; grid coordinates. All 19
Z Speed Nautical miles per hour; kilometers per hour. Units and equipment 5

Figure 4-4. Labeling Field Definitions

As an example, we will build the symbol for a friendly nuclear, biological, or chemical (NBC) reconnaissance unit equipped with the FOX and M21 long-range sensor.

STEP 1. First choose the frame (friendly) and graphic for the basic function or branch of the unit, labeling field "A," In this example, the basic function is NBC.
STEP 2. Choose the graphic modifier for the secondary function or capability, labeling field "A1," (possibly from the list of modifiers). In this example, the secondary function and first modifier is reconnaissance.
STEP 3. Choose the graphic modifier for the next capability, labeling field
"A2." In this example, the tertiary (third function or capability) is wheeled armored vehicle.
STEP 4. Choose the graphic modifier for any other capability, labeling field
"A3.". This example requires no more graphic modifiers.
STEP 5. If necessary to fully distinguish the unit from another type of unit, include a text abbreviation, labeling field "ATEXT," inside the symbol frame. In this example, a text abbreviation "RS" is added inside the symbol to show that this unit is specially equipped with the M21 sensor. Unit size indicators, shown in Figure 4-5, are placed at the top center of the symbol frame in field "B."



Size Indicator Meaning
Installation
Team/Crew
Squad
Section
Platoon/Detachment
I Company/Battery/Troop
I I Battalion/Squadron
I I I Regiment/Group
X Brigade
X X Division
X X X Corps
X X X X Army
X X X X X Army Group/Front
X X X X X X Region

Figure 4-5. Unit Size and Installation Indicator


Figure 4-6 shows the abbreviations used when identifying units or marking boundaries.

Long Name Abbreviation
Air Assault
Airborne
Armored Cavalry Regiment
Armored Division
Cavalry Division
Infantry Division
Light Infantry Division
Mechanized Battalion or TF
Mechanized Infantry Division
Mountain
Separate Armored Brigade
Separate Infantry Brigade
Separate Infantry Brigade (Light)
Separate Infantry Brigade (Mechanized)

AASLT
ABN
ACR
AD
CAV
ID
ID(L)
MECH
ID(M)
MTN
SAB
SIB
SIB(L)
SIB(M)

Figure 4-6. Unit Abbreviations


SYMBOLS FOR THE GROUND ENVIRONMENT

Situation maps and overlays provide a rapid and easily understood means by which a commander or staff may express an operational plan, concept, or friendly or enemy situation. The combination of unit and weapon symbols with objectives, boundaries, routes of march, and other control measures creates an indispensable tool for quickly and accurately portraying battle activity. Standardization of techniques is essential if tactical information is to be relayed without misunderstanding.

Present and Proposed Locations
Basic unit and installation symbols are drawn with either solid or broken lines. The center of mass of the symbol indicates the general vicinity of the center of mass of the unit. If a staff is added to identify a headquarters, the base of the staff indicates the precise location of the headquarters.

A solid line symbol represents a present or actual location.
A broken line symbol indicates a future or projected location.


Precise Locations To indicate locations more precisely, the following methods are employed.

Basic symbols other than the headquarters symbol (for example, points) may be placed on a staff which is extended or bent. The end of the staff indicates the precise location.
Since the headquarters symbol already includes a staff, this staff may be extended or bent. The end of the staff, or extension (if used), indicates the exact location of the headquarters.
If several headquarters are at one location, more than one headquarters symbol can be on a single staff.
If a group of units or installations other than a headquarters is at one location, the grouping of symbols may be enclosed with a bracket and the exact location indicated with a staff.

Updated 27 July 1997.

Fast Reverse
Table of Contents
Reverse
Chapter 3
Forward
Next Section
Fast Forward
Chapter 5