FAS | Military | DOD 101 | Systems | Land Warfare |||| Index | Search | Join FAS


M252 81mm Medium Extended Range Mortar


The M252 81mm Mortar System was developed under a co-developement agreement with the United Kingdom to replace the M29A1 Mortar. A Blast Attenuation Device (BAD) is attached to the muzzle of the cannon assembly to reduce the blast effects on the mortar crew. The M252 is ideally suited to support airborne, air assault, mountain and light infantry units.

Length: 56 inches (142.24 centimeters)
Weight:
Mortar Assembly: 35 pounds (15.89 kg)
Bipod: 26 pounds (11.80 kilograms)
Baseplate: 25.5 pounds (11.58 kilograms)
Sight Unit: 2.5 pounds (1.14 kilograms)
Total: 89 pounds (40.41 kilograms)
Bore diameter: 81mm
Maximum effective range: 5700 meters
Minimum Range: 80 meters
Rates of fire:
Maximum: 33 rounds per minute
Sustained: 16 rounds per minute
Elevation: 45 to 85 degrees
Unit Replacement Cost: $24,717
Type Classified Standard: July 1984

The M252 Mortar System consists of the following major components: Features: The M252 81mm Medium Extended Range Mortar is a crew-served, medium weight mortar which is highly accurate and provides for a greater range (4,500 meters to 5,650 meters) and lethality than the previous 81mm mortar. The cannon has a crew-removable breech plug and firing pin. The muzzle end has a short tapered lead-in which acts as a blast attenuator device. The breech end is finned for better cooling. This mortar also uses the standard M64 mortar sight of the 60mm mortar, M224.

Background: This mortar replaced the previous Marine Corps 81mm mortar in 1986. The M252 is an adaptation of the standard British 81mm mortar developed in the 1970s. It is mostly commonly found in the mortar platoon of an infantry battalion.


Sources and Resources



FAS | Military | DOD 101 | Systems | Land Warfare |||| Index | Search | Join FAS

http://www.fas.org/man/dod-101/sys/land/m252.htm
Maintained by Robert Sherman
Originally created by John Pike
Updated Tuesday, January 05, 1999 5:05:33 PM