PROTOCOL ON EXISTING TYPES OF CONVENTIONAL ARMAMENTS AND EQUIPMENT

The States Parties hereby agree upon: (a) lists, valid as of the date of Treaty signature, of existing types of conventional armaments and equipment subject to the measures of limitation, reduction, information exchange and verification; (b) procedures for the provision of technical data and photographs relevant to such existing types of conventional armaments and equipment; and (c) procedures for updating the lists of such existing types of conventional armaments and equipment, in accordance with Article II of the Treaty on Conventional Armed Forces in Europe of November 19, 1990, hereinafter referred to as the Treaty.

SECTION I. EXISTING TYPES OF CONVENTIONAL ARMAMENTS AND EQUIPMENT LIMITED BY THE TREATY

1. Existing types of battle tanks are:

All models and versions of an existing type of battle tank listed above shall be deemed to be battle tanks of that type.

2. Existing types of armoured combat vehicles are:

(A) Armoured Personnel Carriers:

All models and versions of an existing type of armoured personnel carrier listed above shall be deemed to be armoured personnel carriers of that type, unless such models and versions are included in the armoured personnel carrier look-alike list in Section II, paragraph 1 of this Protocol.

* This multi-purpose lightly armoured vehicle may be exceptionally modified within 40 months of entry into force of the Treaty into an armoured personnel carrier look-alike listed in Section II, paragraph 1 of this Protocol as MT-LB-AT by alteration of the interior of the vehicle through the removal of the left-hand combat infantry squad seating and the welding of the ammunition racking to the side and the floor at a minimum of six points so that the vehicle is not capable of transporting a combat infantry squad. Such modifications may be accomplished at locations other than reduction sites. MT-LB armoured personnel carriers that have not been modified shall be reported in accordance with the Protocol on Information Exchange as armoured personnel carriers.

B) Armoured Infantry Fighting Vehicles:

All models and versions of an existing type of an armoured infantry fighting vehicle listed above shall be deemed to be armoured infantry fighting vehicles of that type, unless such models and versions are included in the armoured infantry fighting vehicle look-alike list in Section II, paragraph 2 of this Protocol.

(C) Heavy Armament Combat Vehicles:

All models and versions of an existing type of heavy armament combat vehicle listed above shall be deemed to be heavy armament combat vehicles of that type.

(3. Existing types of artillery are:

(A) Guns, Howitzers and Artillery Pieces Combining the Characteristics of Guns and Howitzers:

(B) Mortars:

(C) Multiple Launch Rocket Systems:

All models and versions of an existing type of artillery listed above shall be deemed to be artillery of that type.

4. Existing types of combat aircraft are:

All models or versions of an existing type of combat aircraft listed above shall be deemed to be combat aircraft of that type.

5. Existing types of attack helicopters are:

(A) Specialised Attack Helicopters:

Subject to the provisions in Section I, paragraph 3 of the Protocol on Helicopter Recategorisation, all models or versions of an existing type of specialised attack helicopter listed above shall be deemed to be specialised attack helicopters of that type.

(B) Multi-Purpose Attack Helicopters:

Subject to the provisions in Section I, paragraphs 4 and 5 of the Protocol on Helicopter Recategorisation, all models or versions of an existing type of multi-purpose attack helicopter listed above shall be deemed to be multi-purpose attack helicopters of that type.

SECTION II. EXISTING TYPES OF CONVENTIONAL ARMAMENTS AND EQUIPMENT NOT LIMITED BY THE TREATY

1. Existing types of armoured personnel carrier look-alikes are:

2. Existing types of armoured infantry fighting vehicle look-alikes are:

3. Existing types of primary trainer aircraft which are designed and constructed for primary flying training and which may possess only limited armament capability necessary for basic training in weapon delivery techniques are:

4. Existing types of combat support helicopters are:

5. Existing types of unarmed transport helicopters which are not equipped for the employment of weapons are:

6. Existing types of armoured vehicle launched bridges are:

SECTION III. TECHNICAL DATA AND PHOTOGRAPHS

1. Technical data, in accordance with the agreed categories in the Annex to this Protocol, together with photographs presenting the right or left side, top and front views for each of its existing types of conventional armaments and equipment listed in Sections I and II of this Protocol shall be provided by each State Party to all other States Parties at the signature of the Treaty. In addition, photographs of armoured personnel carrier look-alikes and armoured infantry fighting vehicle look-alikes shall include a view of such vehicles so as to show clearly their internal configuration illustrating the specific characteristic which distinguishes this particular vehicle as a look-alike. Photographs in addition to those required by this paragraph may be provided at the discretion of each State Party.

2. Each existing type of conventional armaments and equipment listed in Sections I and II of this Protocol shall have a model or version of that type designated as an exemplar. Photographs shall be provided for each such designated exemplar pursuant to paragraph 1 of this Section. Photographs shall not be required of models and versions of a type that have no significant externally observable differences from the exemplar of that type. The photographs of each exemplar of a type shall contain an annotation of the existing type designation and national nomenclature for all models and versions of the type that the photographs of the exemplar represent. The photographs of each exemplar of a type shall contain an annotation of the technical data for that type in accordance with the agreed categories in the Annex to this Protocol. In addition, the annotation shall indicate all models and versions of the type that the photographs of the exemplar represent. Such technical data shall be annotated on the side view photograph.

SECTION IV. UPDATES OF EXISTING TYPES LISTS AND OBLIGATIONS OF THE STATES PARTIES

1. This Protocol constitutes agreement by the States Parties only with respect to existing types of conventional armaments and equipment as well as with respect to the categories of technical data set forth in Sections I and II of the Annex to this Protocol.

2. Each State Party shall be responsible for the accuracy of technical data for only its own conventional armaments and equipment provided in accordance with Section III of this Protocol.

3. Each State Party shall notify all other States Parties, upon the entry into service with the armed forces of that State Party within the area of application, of: (a) any new type of conventional armaments and equipment which meets one of the definitions in Article II of the Treaty or which falls under a category listed in this Protocol, and (b) any new model or version of a type listed in this Protocol. At the same time, each State Party shall provide all other States Parties with the technical data and photographs required by Section III of this Protocol.

4. As soon as possible, and in any case no later than 60 days following a notification pursuant to paragraph 3 of this Section, the States Parties shall initiate update actions, in accordance with the provisions set forth in Article XVI of the Treaty and the Protocol on the Joint Consultative Group, for the lists of existing types of conventional armaments and equipment in Sections I and II of this Protocol.

ANNEX TO THE PROTOCOL ON EXISTING TYPES OF CONVENTIONAL ARMAMENTS AND EQUIPMENT

SECTION I. AGREED CATEGORIES OF TECHNICAL DATA

The following are agreed categories of technical data for each model and version of existing types of conventional armaments and equipment:

1. Battle Tanks

Existing Type
National Nomenclature
Main Gun Calibre
Unladen Weight

2. Armoured Combat Vehicles

Armoured Personnel Carriers
Existing Type
National Nomenclature
Type and Calibre of Armaments, if any

Armoured Infantry Fighting Vehicles
Existing Type
National Nomenclature
Type and Calibre of Armaments

Heavy Armament Combat Vehicles
Existing Type
National Nomenclature
Main Gun Calibre
Unladen Weight

3. Artillery

Guns, Howitzers and Artillery Pieces Combining the Characteristics of Guns and Howitzers
Existing Type
National Nomenclature
Calibre

Mortars
Existing Type
National Nomenclature
Calibre

Multiple Launch Rocket Systems
Existing Type
National Nomenclature
Calibre

4. Combat Aircraft
Existing Type
National Nomenclature

5. Attack Helicopters
Existing Type
National Nomenclature

6. Armoured Personnel Carrier Look-Alikes
Existing Type
National Nomenclature
Type and Calibre of Armaments, if any

7. Armoured Infantry Fighting Vehicle Look-Alikes
Existing Type
National Nomenclature
Type and Calibre of Armaments, if any

8. Primary Trainer Aircraft
Existing Type
National Nomenclature
Type of Armaments, if any

9. Combat Support Helicopters
Existing Type
National Nomenclature

10. Unarmed Transport Helicopters
Existing Type
National Nomenclature

11. Armoured Vehicle Launched Bridges
Existing Type
National Nomenclature

SECTION II. SPECIFICATIONS FOR PHOTOGRAPHS

Photographs provided pursuant to Section III of this Protocol shall be in black and white. The use of flash and lighting equipment shall be allowed. The object being photographed shall contrast with the background of the photograph. All photographs shall be of high definition, with continuous tone and in sharp focus. Photographs measuring 13 centimetres by 18 centimetres, not including a border, shall be provided. For aspects other than overhead, all photographs shall be taken from the same level as the equipment being photographed, with the camera placed along or perpendicular to the longitudinal axis of the object being photographed; for the top view, photographs shall show the top and may show the rear aspects of the equipment. The object being photographed shall fill at least 80 percent of the photograph in either horizontal or vertical aspect. A reference gauge shall be included in each photograph together with the object. The gauge shall have alternating half-metre sections in black and white. It shall be long enough to provide accurate scaling and shall be placed on or against the object or in close proximity to it. Each photograph shall be labelled to provide the information required by Section III, paragraph 2 of this Protocol as well as the date when the photograph was taken.