JOINT FLEET MAINTENANCE MANUAL

FOREWORD

LISTING OF APPENDICES.

A Master Locator Guide

B Master List of References

1 MANUAL DEVELOPMENT. The development of the Joint Fleet Maintenance Manual has been a dedicated effort by all Naval Type Commanders to establish a single, unified source of maintenance requirements across all platforms.

2 VOLUME TOPICS. The Joint Fleet Maintenance Manual is made up of five distinct volumes.

Volume I - New Construction

Volume II - Integrated Fleet Maintenance

Volume III - Deployed Maintenance

Volume IV - Tests, Inspections and Special Application Maintenance Programs

Volume V - Quality Maintenance (formerly Quality Assurance)

3 PURPOSE. This manual serves as:

a. A standardized, basic set of minimum requirements to be used by all Type Commanders and subordinate commands.

b. Clear, concise technical instructions to ensure maintenance is planned, executed, completed and documented within all Fleet commands.

c. A vehicle for implementing Regional Maintenance policies across all platforms.

d. A comprehensive set of process descriptions for use by schools such as Surface Warfare Officer School (SWOS), Senior Officer Ship Maintenance and Repair Course (SOSMRC), Engineering Duty (ED), Technical Training, etc.

4 CANCELLATION. The Joint Fleet Maintenance Manual supersedes all existing Type Commander Maintenance and Quality Assurance manuals and all associated correspondence and clarifications thereto, except COMSUBPACINST 4855.3 (Deep Submergence Systems Quality Assurance Manual) which is intended to be incorporated into Volume V in the future. The following is a list of manuals that are cancelled as a result of this manual:

a. COMNAVAIRLANTINST 4700.1/COMNAVAIRPACINST 4700.1 (Naval Air Force Ship Material Manual)

b. COMNAVSURFLANTINST 9000.1 (Naval Surface Force, U.S. Atlantic Fleet, Maintenance Manual)

c. COMNAVSURFPACINST 4700.1 (Naval Surface Force, U.S. Pacific Fleet, Maintenance Manual)

d. COMSUBLANT/COMSUBPACINST 4790.4 (Submarine Force Maintenance Manual)

e. COMNAVAIRLANTINST 9090.1/COMNAVAIRPACINST 9090.1 (Naval Air Force Quality Assurance Manual)

f. COMSUBLANT/COMSUBPACINST 4855.2 (Submarine Force Quality Assurance Manual)

g. COMNAVSURFLANT/COMNAVAIRLANTINST 4855.3/COMNAVSURFPAC/ COMNAVAIRPACINST 4855.3 (Nuclear Surface Forces Afloat Quality Assurance Instruction)

h. COMNAVSURFPACINST 4855.1 (Naval Surface Force, U.S. Pacific Fleet, Quality Assurance Manual)

i. COMNAVSURFLANTINST 9090.1/COMNAVSURFPACINST 4855.22 (Naval Surface Force Quality Assurance Manual)

j. COMNAVSURFLANTINST 9090.2 (IMA Quality Assurance Manual)

k. CINCLANTFLT/CINCPACFLTINST 4355.1 (Quality Assurance Program)

5 DISCUSSION.

5.1 Platform Considerations. Throughout all five volumes, certain requirements apply only to specific platforms. To point these out, the terms (Submarines only), (Aircraft Carriers only), (Surface Ships only), and specific hull designators (e.g., DDG, SSN) are used in parentheses within the paragraph to which they apply. The term "Surface Ship" applies to all ships and craft except submarines and deep submersibles. When no specific platform is mentioned, the requirements apply to all platforms. In this context, the term "Submarine Force" applies to all ships under the responsibility of Submarine Forces, Atlantic and Pacific Fleets; the term "Aircraft Carriers" applies to all ships under the responsibility of Naval Air Forces, Atlantic and Pacific Fleets; and the term "Surface Force" applies to all ships under the responsibility of Naval Surface Forces, Atlantic and Pacific Fleets.

5.2 Maintenance Considerations. In the development of this manual, considerable effort was put forth to standardize work practices, incorporate accepted Regional Maintenance philosophies, and make allowances for future changes resulting from new Regional Maintenance policies. With respect to this, the term Intermediate Maintenance Activity (IMA) has been replaced by Fleet Maintenance Activity (FMA) to reflect the fact that under Regional Maintenance the responsibility for, and the management of, repair facilities has moved to the Fleet.

5.3 Terminology Considerations. Use of the term "Type Commander/Immediate Superior in Command (TYCOM/ISIC)" throughout this manual is defined as follows:

a. For Submarine and Surface Forces, the "TYCOM/ISIC" refers to the Squadron or Group.

b. For Aircraft Carriers, the "TYCOM/ISIC" refers to the Type Commander for maintenance issues.

c. For Submarine and Surface Forces, the term "ISIC", used by itself, refers to the Squadron or Group. The term "ISIC" does not apply to Aircraft Carriers for maintenance issues, but refers to the Permanent Battle Group Commander for operational issues and non-maintenance certifications.

5.4 Administrative Considerations.

5.4.1 Master Locator Guide. Due to the size of this manual, a Master Locator Guide has been developed and is contained in Appendix A of this foreword. The purpose of this Guide is to give users of this manual a complete listing of all the volumes and their major subject matter. This will aid users in locating specific areas within the manual.

5.4.2 Master List of References. Appendix B of this foreword is a Master List of References used throughout the manual. This Master List should be reviewed to ensure that the necessary technical manuals, instructions, etc. are readily available prior to using the manual.

5.4.3 Acronyms. Acronyms used in a particular volume are contained in the List of Acronyms at the front of each volume. Acronyms appearing four or more times in a chapter or those considered "common acronyms" (i.e., words that are known better by their acronym than by their spelled out word, for example, CD-ROM) will be spelled out the first time an acronym is used within a chapter, and the acronym listed in parentheses after the word. Terms not meeting these conditions will not be considered as acronyms within the text and the words will be spelled out.

5.4.4 Appendices. Numerous chapters throughout this manual contain Appendices for the purpose of providing further detail or examples of required reports/correspondence. In all cases the Appendices are intended as examples only and may not reflect the most current guidance or format. Higher authority source documents should be consulted. Sample correspondence provided as Naval messages may be communicated in letter format to facilitate timely transmission by electronic facsimile.

5.4.5 Volume Structure. Volumes IV and V of this manual have been divided into specific parts.

a. Volume IV is made up of four parts. Part I contains general requirements which apply to all platforms (except where specifically exempted), Part II contains requirements which apply to Naval Air Forces, Part III contains requirements which apply to Submarine Forces, and Part IV contains requirements which apply to Surface Forces.

b. Volume V is made up of three parts. Part I contains requirements and procedures necessary to establish and maintain a Quality Control Program. Part II contains the requirements and procedures for establishing and maintaining a Quality Assurance Program. Part III contains information which has been extracted from Parts I and II and is considered Naval Nuclear Propulsion Information. The distribution of Part III has been limited.

6 CHANGES TO THE MANUAL. A formal change process has been established for all five volumes of the manual and is described in Figure 1. Users of this manual are encouraged to submit change requests. All change requests must be submitted using the Change Request Form contained in each volume. If changes are submitted in electronic format, facsimile or E-mail, each change request shall contain the information required on the Change Request Form. Your participation in this change process is both important and appreciated.

Joint Fleet Maintenance Manual Change Process

APPENDIX A

MASTER LOCATOR GUIDE

FOREWORD

1 Manual Development

2 Volume Topics

3 Purpose

4 Cancellation

5 Discussion

5.1 Platform Considerations

5.2 Maintenance Considerations

5.3 Terminology Considerations

5.4 Administrative Considerations

6 Changes to the Manual

VOLUME I - NEW CONSTRUCTION

CHAPTER 1 INTRODUCTION

1.1 Purpose

1.2 Scope

1.3 Changes and Corrections

CHAPTER 2 POLICIES AND RESPONSIBILITIES

2.1 Ship Program Managers

2.2 Naval Sea Systems Command Nuclear Propulsion Directorate (Nuclear Powered Ships only)

2.3 Type Commander

2.4 Supervising Authority

2.5 Immediate Superior in Command

2.6 Building Yard

2.7 Design Yard/Planning Yard

2.8 Commanding Officer, Prospective Commanding Officer, Officer In Charge

2.9 Pre-Commissioning Unit

2.10 Support Activities

CHAPTER 3 PRE DELIVERY

3.1 Purpose

3.2 Shipbuilder's Test Program

3.3 Inspections/Certifications/Assists

3.4 Maintenance and Material Management Program

3.5 Equipment Load Out

3.6 Logistic Support

3.7 Operational Control Transfer

CHAPTER 4 TRIALS

4.1 Purpose

4.2 Dock Trials

4.3 Fast Cruise

4.4 Sea Trials

CHAPTER 5 POST DELIVERY DEFICIENCIES

5.1 Purpose

5.2 Deficiency Correction

5.3 Required Reports

5.4 Combined Trials/Acceptance Trials

5.5 Guarantee Material Inspection/Final Contract Trials

5.6 Post Delivery Deficiency Items

CHAPTER 6 POST SHAKEDOWN AVAILABILITY

6.1 Purpose

6.2 Planning and Execution

6.3 Certification and Trials

6.4 Sea Trials

6.5 Deficiency Correction Period

6.6 Period Following Post Shakedown Availability

VOLUME II - INTEGRATED FLEET MAINTENANCE

CHAPTER 1 INTRODUCTION

1.1 Purpose

1.2 Scope

1.3 Changes and Corrections

CHAPTER 2 MAINTENANCE AND MODERNIZATION PROGRAM

2.1 Purpose

2.2 Maintenance Accomplishment Levels

2.3 Reliability Centered Maintenance

2.4 Condition Based Maintenance

2.5 System/Component Maintenance Programs (Submarines and Aircraft Carriers Only)

2.6 Modernization

2.7 Integrated Fleet Maintenance Management

2.8 Technical Assistance

CHAPTER 3 CHIEF OF NAVAL OPERATIONS SCHEDULED MAINTENANCE AVAILABILITIES

3.1 Purpose

3.2 Chief of Naval Operations Scheduled Maintenance Availabilities

3.3 Maintenance Policies and Procedures

3.4 Availability Work Package Planning

3.5 Availability Planning

3.6 Availability Execution

3.7 Availability Completion Departure Conference

3.8 Post Availability

CHAPTER 4 TYPE COMMANDER SCHEDULED MAINTENANCE AVAILABILITIES

4.1 Purpose

4.2 Type Commander Maintenance Availabilities

4.3 Maintenance Policies and Procedures

4.4 Ship's Force Upkeep

4.5 Categories of Fleet Maintenance Activity Availabilities

4.6 Fleet Maintenance Activity Availability

4.7 Restricted Availability/Restricted Availability Docking

4.8 Technical Availability

4.9 Voyage Repair Availability

4.10 Specialized Maintenance Funding

4.11 Memorandum of Agreement

CHAPTER 5 DEEP SUBMERGENCE VEHICLE/DEEP SUBMERGENCE RESCUE VEHICLE TRIAL REQUIREMENTS

5.1 Purpose

5.2 Deep Submergence Vehicle/Deep Submergence Rescue Vehicle Maintenance Strategies

5.3 Procedures

5.4 Crew Certification/Dock Trials/Fast Cruise

5.5 SEA CLIFF Minimum Sea Trial Requirements

5.6 Deep Submergence Rescue Vehicle Minimum Sea Trial Requirements

5.7 TURTLE Minimum Sea Trial Requirements

VOLUME III - DEPLOYED MAINTENANCE

CHAPTER 1 INTRODUCTION

1.1 Purpose

1.2 Scope

1.3 Changes and Corrections

CHAPTER 2 MAINTENANCE ORGANIZATIONS AND CAPABILITIES

2.1 Command Relationships

2.2 Maintenance Organizations and Capabilities

2.3 Common Maintenance Facilities - All Area of Responsibilities

2.4 Unique Maintenance Facilities - Commander In Chief, United States Naval Force, Europe Area of Responsibility

2.5 Unique Maintenance Facilities - Commander, United States Naval Force, Fifth Fleet Area of Responsibility

2.6 Unique Maintenance Facilities - Commander, Seventh Fleet Area of Responsibility

CHAPTER 3 MAINTENANCE MANAGEMENT

3.1 Purpose

3.2 Ship Repair Work in Western Pacific

3.3 Current Work Package

3.4 Ship's Maintenance Management Coordinator

3.5 Casualty Report Summary

3.6 Deployed Maintenance Periods

3.7 Voyage Repair Policy - All Areas of Responsibility (Non-Nuclear Work)

3.8 Nuclear Propulsion Plant and Related Equipment

3.9 Unsatisfactory Work/Work Practices

3.10 Battle Force Maintenance Resources

CHAPTER 4 SCHEDULED MAINTENANCE PLANNING, PREPARATION AND PRIORITIES

4.1 Continuous Maintenance Screening Program

4.2 Current Ship's Maintenance Project Maintenance While Deployed

4.3 Work Candidate Preparation and Priority

4.4 Submission of Work Packages

4.5 Screening of Work Candidates and Work Packages

CHAPTER 5 MAINTENANCE SUPPORT FOR NON-UNITED STATES NAVY SHIPS AND ACTIVITIES

5.1. Purpose

5.2. Military Sealift Command Vessels

5.3. United States Coast Guard Vessels

5.4. Other Service Craft And Activities

VOLUME IV - TESTS, INSPECTIONS AND SPECIAL APPLICATION MAINTENANCE PROGRAMS

PART I GENERAL

CHAPTER 1 INTRODUCTION

1.1 Purpose

1.2 Scope

1.3 Changes and Corrections

CHAPTER 2 FLEET MODERNIZATION PROGRAM

2.1 Purpose

2.2 Responsibilities

2.3 Alteration Programs

2.4 Monitoring of Alteration Status

2.5 Reporting Change in Alteration Status

2.6 Alteration Requests

2.7 Alteration Feedbacks

2.8 Permanent Modifications to Tenders With Nuclear Support Facilities

CHAPTER 3 FLEET MAINTENANCE ACTIVITY ASSESSMENT

3.1 Purpose

3.2 Assessment Areas

3.3 Assessment Results

3.4 Responsibilities

3.5 Assessment Findings/Corrective Action

CHAPTER 4 SHIPBOARD ELECTROMAGNETIC COMPATIBILITY

4.1 Purpose

4.2 Waterfront Corrective Action Program

4.3 Quick Response Capability

4.4 Shipboard Electromagnetic Compatibility Improvement Program Engineering

4.5 Industrial Electromagnetic Compatibility Program

4.6 Electromagnetic Interference Certification and Electromagnetic Compatibility Maintenance

4.7 Shipboard Electromagnetic Compatibility Improvement Program Technical Assistance Network

CHAPTER 5 BOILER INSPECTION

5.1 Purpose

5.2 Types of Boiler Inspections

5.3 Responsibilities

5.4 Inspection Scheduling

5.5 Boiler Safety Procedures

5.6 Boiler Inspections and Requirements

5.7 Boiler Inspection Guidelines and Reports

5.8 Boiler Inspection Preparation

5.9 Boiler Inspection

5.10 Automatic Boiler Control Systems/Online Alignment Verification Guidelines

5.11 Boiler Flexibility Tests

5.12 System Certification Requirements

5.13 Certified Boiler Water and Feedwater Tester Requirements

5.14 Operating and Casualty Procedures

CHAPTER 6 TECHNICAL ASSESSMENT, REPAIR, GROOM AND EVALUATION PROGRAM

6.1 Purpose

6.2 Technical Assessment, Repair, Groom and Evaluation

6.3 Objectives

6.4 Principles

6.5 Evolutions

6.6 Responsibilities

CHAPTER 7 DIESEL ENGINES

7.1 Purpose

7.2 Diesel Engine Inspector Certification

7.3 Diesel Inspections

7.4 Reporting Requirements

7.5 Compliance

CHAPTER 8 INDUSTRIAL PLANT EQUIPMENT

8.1 Purpose

8.2 Definitions

8.3 Procurement Requirements

8.4 Responsibilities

8.5 Reports

CHAPTER 9 MARINE SANITATION DEVICES

9.1 Purpose

9.2 Certification

9.3 Responsibilities

9.4 System Maintenance and Inspection

9.5 Technical System Assessment

9.6 Training

CHAPTER 10 BOARD OF INSPECTION AND SURVEY MATERIAL INSPECTIONS

10.1 Purpose

10.2 Responsibilities

10.3 Inspection Scheduling

10.4 Preparation for the Board of Inspection and Survey Material Inspection

10.5 Board of Inspection and Survey Trial Conduct and Documentation

10.6 Post Board of Inspection and Survey Trial Actions

CHAPTER 11 MINIATURE/MICROMINIATURE ELECTRONIC REPAIR PROGRAM

11.1 Purpose

11.2 Responsibilities

11.3 Authorized Miniature/Microminiature Outfitting

11.4 Miniature/Microminiature Personnel and Station Requirements

11.5 Progressive Repair Process

11.6 Unique Miniature/Microminiature Guidance (Naval Air Force Only)

11.7 Unique Miniature/Microminiature Guidance (Submarine Force Only)

CHAPTER 12 METROLOGY AND CALIBRATION PROGRAM

12.1 Purpose

12.2 Responsibilities

12.3 Calibration Management

12.4 General Purpose Electronic Test Equipment Loan Pools

12.5 Replacement of General Purpose Electronic Test Equipment

12.6 Electronic Test and Monitoring System Inventory Management

12.7 Critical Gage Program

CHAPTER 13 MOTOR GASOLINE HANDLING AND STORAGE

13.1 Purpose

13.2 Characteristics

13.3 Personnel Hazards

13.4 Storage and Handling

13.5 Motor Gasoline Assessment Program

CHAPTER 14 MAINTENANCE, REPAIR AND OVERHAUL OF SERVICE CRAFT, LANDING CRAFT AND SMALL BOATS

14.1 Purpose

14.2 Material Readiness

14.3 Maintenance of Landing Craft and Small Boats Assigned to Afloat Units

14.4 Maintenance of Service Craft, Landing Craft and Small Boats Assigned to Shore Activities, Group and Squadron Commanders

14.5 Responsibilities

14.6 Repair and Overhaul of Small Boat Engines

14.7 Operation of Small Boat Engines

CHAPTER 15 OXYGEN AND NITROGEN SYSTEMS

15.1 Purpose

15.2 Precautions

15.3 Aviator Breathing Oxygen Testing

15.4 Operations and Maintenance

CHAPTER 16 ACCOUNTABILITY AND CERTIFICATION OF NUCLEAR PROPULSION PLANT TEST AND SUPPORT EQUIPMENT

16.1 Purpose

16.2 Nuclear Test Equipment Categories

16.3 Action

16.4 Procurement

16.5 Nuclear Test Equipment Certification

16.6 Accountability

CHAPTER 17 DEGAUSSING

17.1 Purpose

17.2 Degaussing Definitions

17.3 Ships With Installed Degaussing Systems

17.4 Submarines Without Installed Degaussing Systems

CHAPTER 18 CORROSION CONTROL

18.1 Purpose

18.2 Responsibilities

CHAPTER 19 WEAPONS AND CARGO ELEVATOR ASSESSMENTS

19.1 Purpose

19.2 Elevator Support Unit

19.3 Ship's Force Assessment Responsibilities

19.4 Elevator Support Unit Evolutions

19.5 Visit Scheduling

19.6 Reports

CHAPTER 20 SYSTEM TEST CHECK LIST

20.1 Purpose

20.2 General Instructions

20.3 Record Retention

CHAPTER 21 MAINTENANCE BARRIER CRITERIA

21.1 Purpose

21.2 Types of Barriers

21.3 Barrier Isolation Protection

21.4 Double Barrier Protection

21.5 Single Barrier Protection

21.6 Protection of Electrical Equipment

21.7 Bulkhead Ventilation Valves (Submarines only)

CHAPTER 22 TECHNICAL DATA AND INFORMATION MANAGEMENT

22.1 Purpose

22.2 Technical Libraries

22.3 Index of Technical Publications and Ship's Drawing Index

22.4 Maintenance Support Centers

CHAPTER 23 SYSTEM/EQUIPMENT TAG-OUT PROCEDURE

23.1 Purpose

23.2 Tag-Out Procedure Amplification

23.3 Tag-Out Logs

23.4 Planned Maintenance System Tag-Out Procedure

CHAPTER 24 CANNIBALIZATION

24.1 Purpose

24.2 Definitions

24.3 Authorization (Active Ship)

24.4 Request and Authorization

24.5 Procedures

CHAPTER 25 AMMUNITION OFF-LOAD

25.1 Purpose

25.2 Action

25.3 Notification

CHAPTER 26 HABITABILITY

26.1 Purpose

26.2 Habitability Improvement Programs

26.3 New Construction ships

26.4 Naval Air Force Specific Habitability Improvement Programs

CHAPTER 27 HULL INSPECTION OF SHIPS AND CRAFT

27.1 Purpose

27.2 Action

27.3 Reports

CHAPTER 28 IMPRESSED CURRENT CATHODIC PROTECTION

28.1 Purpose

28.2 Cathodic Protection Logs

28.3 Post Dry-Docking Activation

CHAPTER 29 INFLATABLE LIFE RAFTS

29.1 Purpose

29.2 Fleet Life Raft Program

29.3 Recertification

29.4 Contingency Pools

29.5 Automated Tracking System

29.6 Responsibilities

29.7 Unserviceable/Rejected Life Rafts

29.8 Records

CHAPTER 30 WEIGHT HANDLING EQUIPMENT TESTING AND INSPECTION

30.1 Purpose

30.2 Naval Sea Systems Command Afloat Requirements

30.3 Naval Facilities Engineering Command Ashore Requirements

30.4 Slings

CHAPTER 31 MAINTENANCE AND MATERIAL MANAGEMENT

31.1 Purpose

31.2 Ship Maintenance and Material Management

PART II NAVAL AIR FORCE SPECIFIC

CHAPTER 1 AIRCRAFT LAUNCH AND RECOVERY SYSTEMS FOR AVIATION SHIPS

1.1 Purpose

1.2 Aircraft Launch and Recovery Equipment Maintenance Program

1.3 Aviation Certification

1.4 Carrier And Field Service Unit

1.5 Naval Aviation Depot

1.6 Naval Aviation Depot Voyage Repair Team

CHAPTER 2 STEAM CATAPULT INSPECTION

2.1 Purpose

2.2 Types of Inspections

2.3 Responsibilities

2.4 Inspection Scheduling

2.5 Safety Procedures

2.6 Catapult Accumulator Inspections and Requirements

2.7 Inspection Guidelines and Reports

PART III SUBMARINE FORCE SPECIFIC

CHAPTER 1 WIRE REMOVAL AND REPLACEMENT

1.1 Purpose

1.2 Action

CHAPTER 2 WEIGHT AND MOMENT CONTROL

2.1 Purpose

2.2 Ballast Changes

2.3 Unusual Conditions

CHAPTER 3 SUBMARINE SALVAGE INSPECTION

3.1 Purpose

3.2 Inspections

3.3 Responsibilities

CHAPTER 4 SUBMARINE STORAGE BATTERIES

4.1 Purpose

4.2 Action

CHAPTER 5 TRIDENT SYSTEM AND EQUIPMENT MAINTENANCE PLANS

5.1 Purpose

5.2 TRIDENT System and Equipment Maintenance Plans

CHAPTER 6 SUBMARINE NOISE REDUCTION

6.1 Purpose

6.2 Noise Reduction Program Elements

6.3 Responsibilities

CHAPTER 7 PERIODIC MAINTENANCE REQUIREMENT PROGRAM

7.1 Purpose

7.2 Type Commander Scheduling System

7.3 Periodic Maintenance Requirements Accomplishment

7.4 Material Support for Fleet Maintenance Activity Accomplished Periodic Maintenance Requirements

7.5 Corrective Maintenance of Equipment Using Periodic Maintenance Requirements

7.6 Periodic Maintenance Requirements Accomplishment During Chief of Naval Operations Maintenance Availabilities

7.7 Responsibilities

7.8 Action

CHAPTER 8 UNRESTRICTED OPERATIONS

8.1 Purpose

8.2 Unrestricted Operation Maintenance Scheduling, Planning and Reporting

8.3 Responsibilities

CHAPTER 9 OPERATING DEPTH POLICY

9.1 Purpose

9.2 Initial Tightness Dive

9.3 Deep Dive/Controlled Dive

CHAPTER 10 RETENTION OF MATERIAL DEFICIENCY REPORTS AND RECORDS OF EQUIPMENT CHARACTERISTICS AND TESTS

10.1 Purpose

10.2 Inspection Reports

10.3 Retention of Records of Equipment Characteristics and Tests

CHAPTER 11 SCHEDULED PRESERVATION UPKEEP COORDINATED EFFORT

11.1 Purpose

11.2 Scheduling

11.3 Responsibilities

CHAPTER 12 DIVER LIFE SUPPORT SYSTEMS, SUBMARINE RESCUE CHAMBER AND DRY DECK SHELTER MAINTENANCE AND CERTIFICATION

12.1 Purpose

12.2 Diver Life Support System Maintenance and Certification

12.3 Submarine Rescue Chamber Maintenance and Certification

12.4 Dry Deck Shelter Maintenance and Certification

CHAPTER 13 ELECTROLYTIC OXYGEN GENERATOR REQUIREMENTS

13.1 Purpose

13.2 Responsibilities

13.3 Requirements for Shipboard Personnel Qualification

PART IV SURFACE FORCE SPECIFIC

CHAPTER 1 CABLEWAY ASSESSMENT

1.1 Purpose

1.2 Hazard Categories

1.3 Deficiency Correction

1.4 Assessment Scheduling

1.5 Cableway Assessment/Assist Team Composition and Procedures

1.6 Responsibilities

1.7 Reports

CHAPTER 2 GAS TURBINE ENGINE INSPECTION

2.1 Purpose

2.2 Marine Gas Turbine Inspector

2.3 Gas Turbine Inspections and Requirements

2.4 Requesting Procedures

2.5 Preparation for Inspection

2.6 Inspection Procedures

2.7 Inspection Criteria

2.8 Inspection Reports

CHAPTER 3 HEAT STRESS CONTROL AND REPAIR OF THERMAL INSULATION

3.1 Purpose

3.2 Heat Stress

3.3 Industrial Availability Lagging Plan

3.4 Asbestos Lagging/Insulation

CHAPTER 4 WOOD HULLED SHIPS AND CRAFT

4.1 Purpose

4.2 Wood Decay

4.3 Deck and Hull Maintenance

4.4 Surface Preparation and Painting

4.5 Wooden Hull Bottom Sheathing

4.6 Wooden Sea Chest Foundations

CHAPTER 5 PORTABLE TOOL ASSISTANCE PROGRAM

5.1 Purpose

5.2 Portable Tool Inventory Policy

VOLUME V - QUALITY MAINTENANCE

FOREWORD QUALITY MAINTENANCE

1 Maintenance Principles

1.1 Maintenance Accomplishment

1.2 Quality Control

1.3 Quality Assurance

1.4 Changes and Corrections

PART I

CHAPTER 1 FORMAL WORK PROCEDURES

1.1 Formal Work Procedures

1.2 Supervision

1.3 Type of Formal Work Procedures

1.4 Retention of Formal Work Procedures

1.5 Work Authorization

1.6 Troubleshooting

1.7 Departure From Specification

CHAPTER 2 PERSONNEL QUALIFICATION AND TRAINING

2.1 Purpose

2.2 Qualification Requirements for Oxygen Clean Instructors, Shipboard and FMA Oxygen Clean Workers, and FMA Oxygen Calibration Technicians

2.3 Qualification Requirements for Submarine Nuclear Propulsion Plant Operator/Welders (Navy Enlisted Classification Code 3351) and Supervisor/Welders (3361)

2.4 Quality Control Training Topics

CHAPTER 3 WELDER AND BRAZER QUALIFICATIONS

3.1 Purpose

3.2 Brazer Qualifications

3.3 Qualification Requirements for Navy Enlisted Classification Code 4954 and 4955 Welders

3.4 Qualification Requirements for Navy Enlisted Classification Code 4956 Welders

PART II

CHAPTER 1 INTRODUCTION

1.1 Purpose

1.2 Cancellation

1.3 The Need for Quality Assurance

1.4 Scope

1.5 Quality Assurance Program

CHAPTER 2 ORGANIZATIONAL RESPONSIBILITIES

2.1 Purpose

2.2 Fleet Responsibilities

2.3 Type Commander Responsibilities

2.4 Immediate Superior in Command Responsibilities

2.5 Ship Responsibilities

2.6 Fleet Maintenance Activity Responsibilities

2.7 Other Activity Responsibilities

CHAPTER 3 CONTROLLED WORK REQUIREMENTS

3.1 Purpose

3.2 Controlled Work Requirements

CHAPTER 4 IN-PROCESS CONTROL

4.1 Purpose

4.2 Reactor Plant Work Accomplishment Report (Submarines only)

4.3 SUBSAFE Re-Entry Control Nuclear and Non-Nuclear (Submarines only)

4.4 Material Condition Monitoring (Submarines only)

4.5 Welding, Brazing and Nondestructive Testing

4.6 Test, Measurement and Diagnostic Equipment

4.7 Torque

4.8 Inspections

CHAPTER 5 MATERIAL CONTROL

5.1 Purpose

5.2 Nuclear

5.3 Non-Nuclear

CHAPTER 6 TESTING REQUIREMENTS

6.1 General

6.2 Non-Nuclear Testing

6.3 Reactor Plant and Nuclear Support Facility Testing

6.4 Weight Handling Equipment

6.5 Test Pressure Source Documents

6.6 Exemptions/Alternative Test Requirements (Non-Nuclear)

6.7 Supplemental Test Criteria (Non-Nuclear)

CHAPTER 7 DEPARTURE FROM SPECIFICATION (DFS/WAIVERS/NUCLEAR LIAISON ACTION

REQUEST)

7.1 Purpose

7.2 Departure from Specification

7.3 Departure from Specification Procedures

7.4 Nuclear Cognizant Areas

CHAPTER 8 AUDITS AND SURVEILLANCE

8.1 Purpose

8.2 Reporting Audit Results and Corrective Action

8.3 Scheduling of Audits during Chief of Naval Operations Availabilities

CHAPTER 9 PERSONNEL QUALIFICATION AND TRAINING

9.1 Purpose

9.2 Qualification Requirements for Quality Assurance Officers

9.3 Qualification Requirements for Local Government Inspector

9.4 Qualification Requirements for Quality Assurance Supervisor

9.5 Qualification Requirements for Quality Assurance Inspector

9.6 Qualification Requirements for Controlled Material Petty Officer/Controlled Material Handler

9.7 Qualification Requirements for Reactor Plant, Steam Plant and Gas System Cleanliness Inspector/Certifier

9.8 Training Topics

9.9 Qualification Requirements for Nondestructive Test Personnel

CHAPTER 10 QUALITY ASSURANCE RECORDS

10.1 Purpose

10.2 Fleet Quality Assurance Record Retention

10.3 Type Commander Quality Assurance Record Retention

10.4 Immediate Superior in Command Quality Assurance Record Retention

10.5 Ship Quality Assurance Record Retention

10.6 Fleet Maintenance Activity Quality Assurance Record Retention

CHAPTER 11 BLANK REPRODUCIBLE FORMS AND FORM INSTRUCTIONS

11.1 Purpose

11.2 List of Forms

PART III

CHAPTER 1 NAVAL NUCLEAR PROPULSION INFORMATION

1.1 Purpose

1.2 Presentation of Information

VOLUME V INDEX

APPENDIX B

MASTER LIST OF REFERENCES

CINCLANTFLTINST 3500.18 - Certification and Readiness of Aviation Facilities in Naval Ships Operating Aircraft

CINCLANTFLTINST 3540.2 - Fleet Engineering Readiness Process

CINCLANTFLTINST 3540.8 - Engineering Department Training Program for Conventionally Powered Surface Ships and Aircraft Carriers

CINCLANTFLTINST 3540.9 - Propulsion Examining Board Assessment and Certification Guide

CINCLANTFLTINST 4100.3 - Navy Energy Usage Reporting System (NEURS)

CINCLANTFLTINST 4700.7 - Mediterranean/MidEastFor Ship Maintenance Plan

CINCLANTFLTINST 4700.9 - Test Equipment Calibration Readiness Review (TECRR)

CINCLANTFLTINST 4700.10 - Policies and Procedures for Fleet Technical Support

CINCLANTFLTINST 4700.11 - Maintenance Policy for Battle Force Intermediate Maintenance Activities (BFIMA)

CINCLANTFLTINST 4720.3 - Processing for Initiating, Approving and Scheduling Afloat C4I Systems Installation and Upgrades

CINCLANTFLTINST 5400.2 - U.S. Atlantic Fleet Regulations

CINCLANTFLTINST 5451.1 - Afloat Training Organization

CINCLANTFLT OPORD 2000

CINCPACFLTINST 3540.2 - Fleet Engineering Readiness Process

CINCPACFLTINST 3540.8 - Engineering Department Training Program for Conventionally Powered Surface Ships and Aircraft Carriers

CINCPACFLTINST 3540.9 - Propulsion Examining Board Assessment and Certification Guide

CINCPACFLTINST 4100.3 - Navy Energy Usage Reporting System (NEURS)

CINCPACFLTINST 4341.1 - Fleet Technical Assistance (FTA) Program

CINCPACFLTINST 4700.9 - Maintenance Policy for Battle Force Intermediate Maintenance Activities (BFIMA)

CINCPACFLTINST 4710.6 - Policy for Accomplishment of Ship Repair Work in WESTPAC

CINCPACFLTINST 4720.3 - Processing for Initiating, Approving and Scheduling Afloat C4I Systems Installation and Upgrades

CINCPACFLTINST 5400.3 - U.S. Pacific Fleet Regulations

CINCPACFLTINST 5451.1 - Afloat Training Organization

CINCPACFLTINST 9830.1 - Certification of Aviation Facilities in Naval Ships Operating Aircraft

CINCPACFLT OPORD 201

CINCUSNAVEURINST 4700.7 - Mediterranean/MidEastFor Ship Maintenance Plan

COMLOGWESTPACINST 4700.1 - Maintenance Handbook for Deployed Ships

COMNAVAIRLANTINST 3400.4 - Air Department Standard Operating Procedures

COMNAVAIRLANTINST 3500.20 - Aircraft Carrier Training and Readiness Manual

COMNAVAIRLANTINST 4105.2 - Aircraft Carrier Maintenance Support Centers (MSC) Policy and Procedures

COMNAVAIRLANTINST 4790.34 - Electrostatic Discharge (ESD) Control Program

COMNAVAIRLANTINST 4790.40 - COMNAVAIRLANT/COMNAVAIRPAC Aircraft Launch and Recovery Equipment Maintenance Program (ALREMP) Management Teams

COMNAVAIRLANTINST 4790.42 - CV/CVN Intermediate Maintenance Activity (IMA) Module Test and Repair Facility (MTRF)

COMNAVAIRLANTINST 9080.2 - Conduct of Trials and Inspections Incident to Construction, Overhauls or Availabilities of Nuclear Powered Aircraft Carriers (CVN)

COMNAVAIRLANTINST 9090.2 - Conduct of Shipyard Trials and Inspections Incident to Service Life Extension Program (SLEP), Overhauls or Availabilities of Conventionally Powered Aircraft Carriers

COMNAVAIRLANTINST 13640.2 - Naval Aircraft Carrier Metrology and Calibration Program

COMNAVAIRLANTINST 13640.3 - Naval Aviation Metrology and Calibration Program

COMNAVAIRLANTINST 13650.1 - Individual Material Readiness List (IMRL) Program

COMNAVAIRPACINST 3400.4 - Air Department Standard Operating Procedures

COMNAVAIRPACINST 3500.20 - Aircraft Carrier Training and Readiness Manual

COMNAVAIRPACINST 4441.24 - Aircraft Carrier Maintenance Support Centers (MSC) Policy and Procedures

COMNAVAIRPACINST 4790.39 - COMNAVAIRLANT/COMNAVAIRPAC Aircraft Launch and Recovery Equipment Maintenance Program (ALREMP) Management Teams

COMNAVAIRPACINST 4790.54 - CV/CVN Intermediate Maintenance Activity (IMA) Module Test and Repair Facility (MTRF)

COMNAVAIRPACINST 13640.2 - Naval Aircraft Carrier Metrology and Calibration Program

COMNAVAIRPACINST 13640.3 - Naval Aviation Metrology and Calibration Program

COMNAVSURFLANTINST 3502.2 - Surface Force Training Manual

COMNAVSURFLANTINST 3540.18 - Engineering Department Organization and Regulation Manual (EDORM)

COMNAVSURFLANTINST 4400.1 - Surface Force Supply Procedures

COMNAVSURFLANTINST 4700.4 - Fleet Introduction Handbook

COMNAVSURFPACINST 3501.4 - Aviation Readiness Evaluation (ARE) and Certification of Aviation Facilities Onboard COMNAVSURFPAC Ships

COMNAVSURFPACINST 3502.2 - Surface Force Training Manual

COMNAVSURFPACINST 3540.13 - Engineering Department Organization and Regulation Manual (EDORM)

COMNAVSURFPACINST 4400.1 - Surface Force Supply Procedures

COMNAVSURFPACINST 4734.1 - Metrology and Calibration (METCAL)

COMSERVFORNAVCENTINST 4700.1 - Maintenance Handbook for Deployed Ships

COMSERVFORSIXTHFLTINST 4700.1 - Maintenance Handbook for Deployed Ships

COMSEVENTHFLT OPORD 201

COMSUBLANTNOTE C3120 - Submarine Operating Restrictions and Depths Authorizations

COMSUBLANT OPORD 2000

COMSUBLANTINST 2450.1 - Submarine Electromagnetic Interference (EMI) Reduction and Electromagnetic Compatibility (EMC) Self-Sufficiency

COMSUBLANTINST C3500.1 - Submarine Force Training Manual

COMSUBLANTINST 3540.10 - Periodic Monitoring of Submarines and Support Facilities

COMSUBLANTINST 4406.1 - Submarine Supply Procedures Manual

COMSUBLANTINST 4419.1 - Module Screening and Repair Activity (MSRA) Repairables Management Procedure

COMSUBLANTINST 5400.4 - Submarine Force, U.S. Atlantic Fleet Regulations

COMSUBLANTINST C5400.30 - Engineering Department Organization Manual

COMSUBLANTINST 9460.4 - Submarine Towed Array Operations

COMSUBPAC OPORD 201

COMSUBPACINST 2450.1 - Submarine Electromagnetic Interference (EMI) Reduction and Electromagnetic Compatibility (EMC) Self-Sufficiency

COMSUBPACINST C3500.1 - Submarine Force Training Manual

COMSUBPACINST 3540.10 - Periodic Monitoring of Submarines and Support Facilities

COMSUBPACINST 4406.1 - Submarine Supply Procedures Manual

COMSUBPACINST 4419.1 - Submarine Tender Supply Management Procedures for AN/BSY-1 Repairables

COMSUBPACINST 4855.3 - Quality Assurance Manual for Deep Submergence Systems

COMSUBPACINST 5400.7 - Submarine Force, U.S. Pacific Fleet Regulations

COMSUBPACINST C5400.30 - Engineering Department Organization Manual

COMSUBPACINST 9460.4 - Submarine Towed Array Operations

COMSUBPACNOTE C3120 - Submarine Operating Restrictions and Depth Authorizations

Divers Pre-Deployment Noise Inspection Procedures Manual

DOD-STD-2003 - Military, Standard, Electric Plant Installation Standard Methods for Surface Ships and Submarines

FGC 2212 - Maintenance Support Center Procedures Manual

INSURVINST 4730.1 - Trials and Inspections of Surface Ships

INSURVINST 4730.2 - Trials and Material Inspections of Submarines

INSURVINST 4730.8 - Reports of Trials, Material Inspections and Survey Conducted by INSURV

INSURVINST 4730.11 - Preparation of Deficiency Forms

Maintenance Plan 4100-02-01 - Command and Control System (CCS) Electromagnetic Interference (EMI) Testing

MIL-B-7838 - Internal Wrenching Bolts

MIL-HDBK-263 - Electrostatic Discharge Control Handbook for Protection of Electrical and Electronic Parts, Assemblies and Equipment

MIL-HDBK-773 - Electrostatic Discharge Protective Packaging

MIL-P-24534 - Planned Maintenance System: Development of Maintenance Requirement Cards, Maintenance Index Pages, and Associated Documentation

MIL-S-24340 - Polyurethane (Polyether Base) Deck Sealing Compound

MIL-STD-248 - Welding and Brazing Procedure and Performance Qualification

MIL-STD-271 - Requirements for Nondestructive Testing Methods

MIL-STD-278 - Welding and Casting Standard

MIL-STD-413 - Visual Inspection Guide for Elastomeric O-rings

MIL-STD-438 - Schedule of Piping, Valves, Fittings, and Associated Piping Components for Submarine Service

MIL-STD-767 - Cleaning Requirements for Special Purpose Equipment, Including Piping Systems

MIL-STD-777 - Schedule of Piping, Valves, Fittings, and Associated Piping Components for Naval Surface Ships

MIL-STD-792 - Identification Marking Requirements for Special Purpose Components

MIL-STD-1330 - Cleaning and Testing of Shipboard Oxygen, Nitrogen and Hydrogen Gas Piping Systems

MIL-STD-1388 - Logistic Support Analysis

MIL-STD-1627 - Bending of Pipe or Tube for Ship Piping Systems

MIL-STD-1630 - Servicing and Certification Requirements for Oxygen System and Component Cleanliness

MIL-STD-1680 - Installation Criteria for Shipboard Secure Electrical Information Processing Systems

MIL-STD 1686 - Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment

MIL-STD-1688 - Fabrication, Welding and Inspection of HY-80/100 Submarine Applications

MIL-STD-1689 - Fabrication, Welding and Inspection of Ship's Structures

MIL-STD-2039 - Field Changes and Field Change Kit Preparation

MIL-STD-2132 - Nondestructive Examination Requirements for Special Applications

MIL-STD-2190 - Non-Metallic Seal Materials

MIL-V-22133 - Valves, Resilient and Metal Seated, Butterfly

MIL-V-24624 - Valves, Butterfly, Wafer and Lug Style

NAVFAC P-307 - Management of Weight Handling Equipment, Maintenance and Certification

NAVAIR 01-1A-23 - Electronic Assembly Repair Standard Maintenance Practice

NAVAIR 13-1-6.1 - Aviation Crew Systems, Chapter 7 (LRU 13/A)

NAVAIR 17-1-124 - Microminiature Component Repair Set

NAVAIR 17-1-127 - Periodic Proofload Testing of Weapons Support Equipment W/IPB

NAVAIR 17-35MTL-1 - Metrology Requirements List

NAVAIR 17-35NCA-1 - Navy Calibration Activity (NCA) List

NAVAIR 17-35QAL-15 - Naval Aircraft Carrier (METCAL) Program Manual

NAVAIR 17-600-141-6-1 - Microminiature Repair Status Pre-operational Check List

NAVAIR 17-600-141-6-2 - Microminiature Repair Station

NAVAIR A6-332AO-GYD-000 - Laboratory and Aviators Breathing Oxygen Field Guide

NAVAIR 4790-PLN-001 - Standard Maintenance Practices 2M Electronic Assembly Repair

NAVAIRINST 3120.1 - Lead Systems Command Procedures and Responsibilities for Certification of Aviation Facilities and Equipment in Naval Ships Operating Aircraft

NAVAIRINST 13800.11 - Procedures and Responsibilities for Certification and Verification of the Precision Approach and Landing System

NAVCOMPTINST 7000.38 - Productivity Enhancing Incentive Fund (PEIF)/The Productivity Enhancement Capital Investment Fast Payback Program

NAVEDTRA 10500 - Catalog of Navy Training Courses

NAVEDTRA 43241 - Personnel Qualification Standard for Ship's Maintenance and Material Management (3-M) System

NAVMED 5010 - Manual of Naval Preventive Medicine

NAVORD OP 4 - Ammunition Afloat

NAVPERS 18068 - Manual of Navy Enlisted Manpower and Personnel Classifications and Occupational Standards

NAVSEA OD 45843 - Calibration Facility Requirements for Navy Field Calibration Activities

NAVSEA OD 45845 - Metrology Requirements List (METRL)

NAVSEA OP-4 - Ammunition Afloat

NAVSEA OP 3347 - Ordnance Safety Precautions, U.S. Navy

NAVSEA OP 4098 - Handling Ammunition, Explosives and Hazardous Material with Industrial Materials Handling Equipment

NAVSEA S9086-CH-STM-010 - NSTM Chapter 074 V1 (Welding and Allied Processes)

NAVSEA S9086-CH-STM-020 - NSTM Chapter 074 V2 (Nondestructive Testing of Metals, Qualification and Certification Requirements for Naval Personnel (Non-nuclear))

NAVSEA S9086-CH-STM-030 - NSTM Chapter 074 V3 (Gas Free Engineering)

NAVSEA S9086-CJ-STM-000 - NSTM Chapter 075 (Threaded Fasteners)

NAVSEA S9086-CM-STM-010 - NSTM Chapter 078 (Gaskets, Packing and Seals)

NAVSEA S9086-CN-STM-030 - NSTM Chapter 079 V3 (Damage Control Engineering Casualty Control)

NAVSEA S9086-C4-STM-000 - NSTM Chapter 094 (Trials)

NAVSEA S9086-C6-STM-000 - NSTM Chapter 096 (Weights and Stability)

NAVSEA S9086-DA-STM-000 - NSTM Chapter 100 (Hull Structures)

NAVSEA S9086-GX-STM-010 - NSTM Chapter 220, V1 (Boiler Water/Feedwater Chemistry)

NAVSEA S9086-GY-STM-010 - NSTM Chapter 221 (Boilers)

NAVSEA S9086-G1-STM-010 - NSTM Chapter 223, V1 (Submarine Storage Batteries - Lead Acid Battery)

NAVSEA S9086-HB-STM-010 - NSTM Chapter 233 (Diesel Engines)

NAVSEA S9086-HC-STM-000 - NSTM Chapter 234 (Marine Gas Turbines)

NAVSEA S9086-QN-STM-010 - NSTM Chapter 475 (Magnetic Silencing)

NAVSEA S9086-RJ-STM-000 - NSTM Chapter 504 (Pressure, Temperature and other Mechanical and Electromechanical Measuring Instruments)

NAVSEA S9086-RK-STM-010 - NSTM Chapter 505 (Piping Systems)

NAVSEA S9086-RQ-STM-010 - NSTM Chapter 510 (Heating, Ventilation, and Air Conditioning Systems for Surface Ships)

NAVSEA S9086-SP-STM-010 - NSTM Chapter 542 (Gasoline and JP-5 Fuel Systems)

NAVSEA S9086-SX-STM-010 - NSTM Chapter 550 (Industrial Gases; Generating, Handling, and Storage)

NAVSEA S9086-TK-STM-010 - NSTM Chapter 571 (Underway Replenishment)

NAVSEA S9086-TL-STM-000 - NSTM Chapter 572 (Shipboard Stores and Provision Handling)

NAVSEA S9086-TM-STM-000 - NSTM Chapter 573 (Booms)

NAVSEA S9086-TV-STM-010 - NSTM Chapter 581 (Anchoring)

NAVSEA S9086-TX-STM-010 - NSTM Chapter 583 (Boats and Small Craft)

NAVSEA S9086-T3-STM-010 - NSTM Chapter 588 (Aircraft Elevators)

NAVSEA S9086-T4-STM-010 - NSTM Chapter 589 (Cranes)

NAVSEA S9086-T8-STM-010 - NSTM Chapter 593 (Pollution Control)

NAVSEA S9086-UU-STM-010 - NSTM Chapter 613 (Wire and Fiber Rope and Rigging)

NAVSEA S9630-AE-MAN-010 - NSTM Chapter 630 (Standard Corrosion Control Manual)

NAVSEA S9086-VD-STM-010 - NSTM Chapter 631 V1 (Preservation of Ships In-Service - General)

NAVSEA S9086-VD-STM-020 - NSTM Chapter 631 V2 (Preservation of Ships In-Service - Surface Preparation and Painting)

NAVSEA S9086-VD-STM-030 - NSTM Chapter 631 V3 (Preservation of Ships In-Service - Surface Ship/Submarine Applications)

NAVSEA S9086-VF-STM-010 - NSTM Chapter 633 (Cathodic Protection)

NAVSEA S9086-VG-STM-010 - NSTM Chapter 634 (Deck Coverings)

NAVSEA S9086-VH-STM-010 - NSTM Chapter 635 (Thermal, Fire and Acoustic Insulation)

NAVSEA S9086-XG-STM-010 - NSTM Chapter 700 (Shipboard Ammunition Handling and Stowage)

NAVSEA S9086-ZN-STM-010 - NSTM Chapter 772 (Cargo and Weapons Elevators)

NAVSEA S9086-7G-STM-010 - NSTM Chapter 997 (Docking Instructions and Routine Work in Dry Dock)

NAVSEA 0901-LP-120-0001 - NSTM Chapter 9120 (Hull Fittings, Lashing Gear, and Access Closures)

NAVSEA 0901-LP-884-0004 - NSTM Chapter 9880 (Damage Control; Compartment Testing and Inspection)

NAVSEA 03X32-GGTB 11 - General Gas Turbine Bulletin Number 11 (Gas Turbine Fleet Representatives)

NAVSEA 0348-LP-159-1000 - Freeze Sealing Manual (Nuclear)

NAVSEA 0387-LP-046-8000 - System Hydrostatic Test Requirements

NAVSEA 0389-LP-031-7000 - General Procedures for Maintenance and Repair of Naval Reactor Plants (Nuclear)

NAVSEA 0900-LP-001-7000 - Fabrication and Inspection of Brazed Piping Systems

NAVSEA 0900-LP-016-6080 - Quality Assurance Standards for Submarine Antenna and Mast Materials

NAVSEA 0900-LP-016-7008 - Submarine Antenna Technical Documentation

NAVSEA 0900-LP-070-6010 - Material Control Standard (Nuclear)

NAVSEA 0900-LP-095-4010 - Ship Test and Evaluation Planning Guide

NAVSEA 0902-LP-018-2010 - General Overhaul Specifications for Deep Diving Submarines (DDGOS)

NAVSEA 0905-LP-485-6010 - Control of Testing and Ships Conditions

NAVSEA 0924-LP-062-0010 - Submarine Safety (SUBSAFE) Requirements Manual

NAVSEA 0948-LP-045-7010 - Material Control Standard (Non-Nuclear)

NAVSEA 0989-LP-030-7000 - Lifting Standard

NAVSEA 0989-LP-031-4000 - Reactor Instrumentation

NAVSEA 0989-LP-037-2000 - Commissioned Submarine General Reactor Plant Overhaul and Repair Specifications

NAVSEA 0989-LP-040-6000 - Air Flask Inspection and Maintenance Requirements (Nuclear)

NAVSEA 0989-LP-043-0000 - Commissioned Surface Ship General Reactor Plant Overhaul and Repair Specification

NAVSEA 0989-LP-058-0000 - AS/AD Tender Nuclear Support Facilities Preventive Maintenance Index

NAVSEA 0989-LP-058-1000 - Destroyer Tender and Submarine Tender Nuclear Support Facilities Overhaul and Repair Specification

NAVSEA 0989-LP-064-3000 - Cleanliness Requirements for Nuclear Propulsion Plant Maintenance by Forces Afloat

NAVSEA 0994-LP-001-9010 - U.S. Navy Diving Manual, Volume 1 (Air Diving)

NAVSEA 0994-LP-001-9020 - U.S. Navy Diving Manual, Volume II (Mixed Gas Diving)

NAVSEA 250-1500-1 - Welding Standard

NAVSEA 389-0153 - Radiological Controls

NAVSEA 392-0755 - Seal Welding Manual (Nuclear)

NAVSEA 392-0775 - Information Notes on Welding and Nondestructive Testing

NAVSEA S0300-B2-MAN-010 - Supervisor of Shipbuilding, Conversion and Repair Operations Manual

NAVSEA S5475-AL-PRO-010 - Principles and Procedures for Magnetic Treatment of Ships

NAVSEA S8800-00-GIP-000 - Handbook for Fleet Maintenance Activity Technical Library Personnel

NAVSEA S9008-AA-PRO-010 - Lifeboat, Inflatable, MK5, MK5 MOD2, and MK6 Inspection, Test and Repair Procedures

NAVSEA S9040-AA-GTP-010 - Shipboard Systems Certification Requirements for Surface Ship Industrial Periods (Non-Nuclear)

NAVSEA S9073-A2-HBK-010 - Resilient Mount Handbook

NAVSEA S9073-AW-SNC-010/(U) - Ship Acoustical Surveys for Submarines

NAVSEA S9078-AA-HBK-010 - Distributed Isolation Material (DIM) Mount Design Handbook

NAVSEA S9213-33-MMA-000/(V) - Radiological Controls for Ships

NAVSEA S9221-C1-GTP-010 - Main Boiler Repair and Overhaul (VOL I)

NAVSEA S9221-C1-GTP-020 - Main Boiler Repair and Overhaul (VOL II)

NAVSEA S9221-D2-MMA-010 - Steam Generating Plant Inspection (Non-Nuclear)

NAVSEA S9223-AF-MMO-010 - Submarine Main Storage Battery Technical Manual

NAVSEA S9233-CJ-HBK-010 - U.S. Navy Diesel Engine Inspectors Handbook, Part 1 (Inspection Procedures)

NAVSEA S9233-CJ-HBK-020 - U.S. Navy Diesel Engine Inspectors Handbook, Part 2 (Technical Information)

NAVSEA S9234-AG-IDX-010 - General Gas Turbine Bulletin Number 0 (Technical Directive Zero Index)

NAVSEA S9234-D9-TED-040 - General Gas Turbine Bulletin Number 4 (Marine Gas Turbine Operating Data Report)

NAVSEA S9313-AM-MMO-010 - Lead-Calcium Alloy Acid Type U.S. Submarine Main Storage Battery TRIDENT 1 Type SCC-57

NAVSEA S9475-AC-PRO-010 - Degaussing Forms, Records and Reporting Procedures

NAVSEA S9505-AF-MMA-010 - Submarine Non-Nuclear Piping Systems Test Manual

NAVSEA S9505-AM-GYD-010 - Submarine Fastening Criteria for Pressure Containing Systems (Non-nuclear)

NAVSEA S9510-AB-ATM-010 - Nuclear Powered Submarine Atmosphere Control Manual, Volume 1

NAVSEA S9510-AB-ATM-020/(C) - Nuclear Powered Submarine Atmosphere Control Manual, Volume 2

NAVSEA S9515-AA-MMO-010 - Electrolytic Oxygen Generator 6L16; Vol 1

NAVSEA S9515-AA-MMO-020 - Electrolytic Oxygen Generator 6L16; Vol 2

NAVSEA S9515-AA-MMO-030 - Electrolytic Oxygen Generator 6L16; Vol 3

NAVSEA S9515-AA-MMO-040 - Twelve-Pulse Hexagon Power Supply for Electrolytic Oxygen Generator, 6L16; Installation , Operation & Maintenance

NAVSEA S9515-AC-MMM-010 - Electrolytic Oxygen Generator, Model 7L16; Vol 1

NAVSEA S9515-AC-MMM-020 - Electrolytic Oxygen Generator, Model 7L16; Vol 2

NAVSEA S9515-AC-MMM-030 - Electrolytic Oxygen Generator, Model 7L16; Vol 3

NAVSEA S9587-B1-MMA-010 - Catapult Steam Support Systems for CV/CVN Class Ships; Description, Operation and Maintenance

NAVSEA S9594-AE-GTP-010 - Disabled Submarine/Requirements for Employment of U.S. Navy Submarine Rescue Systems

NAVSEA S9600-AD-GTP-010 - U.S. Navy Shipboard Furniture Catalog

NAVSEA S9810-AA-GTP-010 - Intermediate Maintenance Activity Work Center Requirements Manual

NAVSEA S9AA0-AB-GOS-010 - General Specifications for Overhaul of Surface Ships (GSO) 1983 Edition

NAVSEA S9AA0-AB-GOS-020 - General Specifications for Overhaul of Surface Ships (GSO) 1990 Edition

NAVSEA S9AA0-AB-GOS-030 - General Specifications for Overhaul of Surface Ships (GSO); AEGIS Supplement

NAVSEA SE004-AK-TRS-010 - Standard Maintenance Practices 2M Electronic Assembly Repair

NAVSEA SG420-AP-MMA-010 - Periodic Testing Arrangements for Ordnance Handling Equipment

NAVSEA SL720-AA-MAN-010 - Fleet Modernization Program (FMP) Management and Operations Manual

NAVSEA SS500-AQ-MMO-010 - Operation and Maintenance Manual for U.S. Navy Two-Man Open Diving Bell

NAVSEA SS521-AA-MAN-010 - U.S. Navy Diving and Manned Hyperbaric Systems Safety Certification Manual

NAVSEA SS750-AA-MMA-010 - Submarine Rescue Chamber (SRC), Modernized 850 Ft

NAVSEA SS800-AG-MAN-010/P-9290 - System Certification Procedures and Criteria Manual for Deep Submergence Systems

NAVSEA ST000-AA-IDX-010 - Portable Electrical/Electronic Test Equipment (PEETE)

NAVSEA ST700-AA-LST-010 - Navy Calibration Activity (NCA) List

NAVSEA ST700-AM-GYD-010 - Metrology and Calibration (METCAL) Laboratory Requirements and Certification Guide

NAVSEA ST700-AM-PRO-010 - Test and Monitoring Systems (TAMS) Program Operations and Procedures

NAVSEA ST700-AS-PRO-010 - Shipboard Gage Calibration Program; Calibration Procedures

NAVSEA ST820-AC-IDX-01K - Master Test Program Set Index (MTPSI)

NAVSEA T0300-AA-MMI-010 - Commercial Industrial Services (CIS) Manual

NAVSEA T9410-AB-PRO-020 - TRIDENT Command and Control System Problem Report System (TCPRS)

NAVSEA T9512-AC-TRQ-010 - SS-SSN-SSBN Submarine Snorkel Systems

NAVSEA TE000-AA-PLN-010 - Certification Plan for 2M Program

NAVSEA TL710-AB-MAN-010 - Depot Modernization Period (DMP) Procedures Manual

NAVSEA TW024-AA-ORD-010 - Unserviceable, Suspended, and Limited Use Ammunition

NAVSEA Technical Specification 9090-310 - Ship Alteration Accomplishment by Installation Teams

NAVSEA STD DWG 407-5287556 - Electronics Material Officer's Guide to Shipboard Electromagnetic Interference Control

NAVSEA STD DWG 407-5287561 - Industrial Electromagnetic Compatibility (IEMC) Work Process Instructions

NAVSEA STD DWG 407-5291780 - Standard Electromagnetic Interference (EMI) Survey Procedures

NAVSEA STD DWG 803-5000902 - Safety Net, Deck Edge, Steel Frame and Nets

NAVSEA STD DWG 803-5184097 - Safety Net, Deck Edge, Aluminum Frame and Nylon Nets

NAVSEA STD DWG 803-5959209 - Aircraft Deck Tiedown Fittings

NAVSEA STD DWG 804-1213717 - Vehicle Tiedown Deck Fittings

NAVSEA STD DWG 804-5184163 - Trunk Safety Nets

NAVSEA STD DWG 805-1639000 - Deck Screw Reversible Eyebolts

NAVSEA STD DWG 805-1645271 - Portable Davits

NAVSEA STD DWG 805-1916300 - Aircraft Securing and Engine Run-up Fittings

NAVSEA STD DWG 805-2276338 - Cleats

NAVSEA STD DWG 805-921806 - Installation of Planking on Deck Plating

NAVSEAINST 3151.1 - Diving and Manned Hyperbaric Systems Certification Program

NAVSEAINST 4130.9 - Configuration Control Procedures For Preparation of Ordnance Alterations (ORDALTS) to Expendable and Non-Expendable Items

NAVSEAINST 4441.2 - Changes to Coordinated Shipboard Allowance List (COSAL); Procedures for

NAVSEAINST 4710.6 - Submarine Advanced Equipment Repair Program (AERP); Assignment of Responsibilities for and Administration of

NAVSEAINST 4720.11 - Shipboard Installation and Modifications Performed by Alteration Installation Teams

NAVSEAINST 4720.14 - Temporary Alterations to Active Fleet Submarines; Control of

NAVSEAINST 4720.15 - Machinery Alterations on HM&E Equipment and Systems

NAVSEAINST 4734.1 - Metrology and Calibration (METCAL) Program

NAVSEAINST 4790.16 - SSBN Extended Operating Cycle (EOC) Program; Policy, Procedures and Responsibilities for

NAVSEAINST 4790.17 - Fleet Test and Repair of Shipboard Electronic Equipment

NAVSEAINST 4790.19 - Submarine Engineered Operating Cycle (SEOC) Program

NAVSEAINST C5511.32 - Safeguarding of Naval Nuclear Propulsion Information

NAVSEAINST 7670.1 - Navy Industrial Fund (NIF) Financial Management Systems and Procedures Manual

NAVSEAINST C9073.2 - Acoustical Survey of Submarines

NAVSEAINST C9094.2 - Submarine Valve Operation Requirements for Builders and Post-Overhaul Sea Trial Test Dives

NAVSEAINST C9096.2 - Weight and Stability Requirements for Active Submarines

NAVSEAINST C9210.4 - Changes, Repair and Maintenance to Nuclear Powered Ships

NAVSEAINST 9210.14 - Changes to Submarine Tenders and Destroyer Tenders with Nuclear Support Facilities, Requirements Concerning

NAVSEAINST 9210.15 - Supply Support and Inventory Management Procedures for NAVSEA -Controlled 2S-Cognizance Reactor Plant Components

NAVSEAINST 9210.23 - Requirements for Naval Nuclear Work - Certification of Work Accomplishment and Data Retention of Associated Records

NAVSEAINST 9210.30 - Procedures for Administration of Nuclear Reactor Plant Preventive Maintenance and Tender Nuclear Support Facilities Preventive Maintenance on Ships

NAVSEAINST C9210.34 - All Nuclear Projects - Material Identification and Control Requirements for Naval Nuclear Reactor Plant Piping Systems

NAVSEAINST 9210.36 - Steam Plant Cleanliness Control

NAVSEAINST 9210.39 - Submarine Nuclear Propulsion Plant Operator Welders: Procedures for Maintenance of Qualification

NAVSEAINST 9210.41 - All Naval Nuclear Propulsion Plants - Use of Standard Lubricants and Penetrating Fluid; Requirements for

NAVSEAINST 9210.45 - Reactor Plant Welding and Nondestructive Testing Personnel

NAVSEAINST 9304.1 - Shipboard Electrical Cable and Cableway Inspection and Reporting Procedures

NAVSEAINST 9593.1 - Certification Program for Sewage Marine Sanitation Devices in U.S. Navy Surface Ships and Craft

NAVSO P 1000 - Navy Comptroller Manual

NAVSO P 3635 - Federal Acquisition Regulation, Section 13, Chapter 312

NAVSO P 3013-2 - Financial Management of Resources Operating Forces Procedures

NAVSUP 5009 (DLAM 4215.1) - Management of Defense-Owned Industrial Plant Equipment

NAVSUP 485 - Afloat Supply Procedures

NAVSUP P-533 - Shipboard Food Service Equipment

NUSC 551E - Handbook for Submarine Antenna Systems

NWP 10-1-10 - Naval Warfare Publication Operational Report

OPNAV 43P6 - MEASURE Users Manual

OPNAVINST C3000.5 - Operation of Naval Nuclear Powered Ships

OPNAVINST 3120.28 - Certification of the Aviation Capability of Naval Ships Operating Aircraft

OPNAVINST 3120.32 - Standard Organization and Regulations of the U.S. Navy

OPNAVINST 3120.33 - Submarine Extended Operating Cycle (SEOC) Program

OPNAVINST 3150.27 - Navy Diving Program

OPNAVINST 3540.3 - Naval Nuclear Propulsion Examining Boards

OPNAVINST 3540.4 - Propulsion Examining Boards for Conventionally Powered Ships

OPNAVINST 3960.16 - Navy Test and Monitoring Systems (TAMS)

OPNAVINST 4000.57 - Logistic Support of the TRIDENT and POSEIDON Fleet Ballistic Missile (FBM) Systems

OPNAVINST 4100.11 - Navy Energy Usage Reporting System (NEURS)

OPNAVINST 4700.7 - Maintenance Policy for Naval Ships

OPNAVINST 4700.8 - Trials, Acceptance, Commissioning, Fitting Out, Shakedown and Post Shakedown Availability of U.S. Naval Ships Undergoing Construction or Conversion

OPNAVINST 4700.38 - Berthing and Messing During CNO Scheduled Maintenance Availabilities

OPNAVINST 4720.2 - Fleet Modernization Program (FMP); Policy For

OPNAVINST 4730.5 - Material Inspection of Ships Conducted by the Board of Inspection and Survey

OPNAVINST 4730.7 - Material Inspection of Submarines Conducted by the Board of Inspection and Survey

OPNAVINST 4780.6 - Procedures for Administering Service Craft and Boats in the U.S. Navy

OPNAVINST 4790.2 - The Naval Aviation Maintenance Program (NAMP)

OPNAVINST 4790.4 - Ships' Maintenance and Material Management (3-M) Manual

OPNAVINST 4790.15 - Aircraft Launch and Recovery Equipment Maintenance Program (ALREMP)

OPNAVINST 5090.1 - Environmental and Natural Resources Program Manual

OPNAVINST 5100.19 - Navy Occupational Safety and Health (NAVOSH) Program Manual for Forces Afloat

OPNAVINST 5100.20 - Shipboard Heat Stress Control and Personnel Protection

OPNAVINST 5100.23 - Navy Occupational Safety and Health (NAVOSH) Program Manual

OPNAVINST 5420.53 - General Precept for the Conduct of Trials and Material Inspections of Ships and Service Craft

OPNAVINST C5510.93 - Navy Implementation of National Policy on Control of Compromising Emanations

OPNAVINST C8950.2 - Magnetic Silencing

OPNAVINST 9080.3 - Procedures for Tests and Trials of Navy Nuclear Powered Ships Under Construction, Modernization, Conversion, Refueling and Overhaul

OPNAVINST 9110.1 - Policy Concerning Submarine Test and Operating Depths

OPNAVINST C9210.2 - Engineering Department Manual for Naval Nuclear Propulsion Plants

OPNAVINST 9220.2 - U.S. Navy Boiler Water and Feedwater Test and Treatment Program (Nuclear Excluded)

OPNAVINST 9221.1 - U.S. Navy Steam Generating Plant Inspection and Inspector Training and Certification Program

OPNAVINST 9233.1 - U.S. Navy Diesel Inspection and Inspector Training and Certification Program

OPNAVINST 9233.2 - U.S. Navy Automated Diesel Engine Trend Analysis Program

OPNAVINST 9234.1 - Marine Gas Turbine Inspector (MGTI) Program

OPNAVINST 9640.1 - Shipboard Habitability Program

OPNAVNOTE 4700 - Notional Intervals, Durations, and Repair Mandays for Depot Level Maintenance Availabilities of United States Navy Ships

OPNAVNOTE 4710 - Fleet Depot Maintenance Schedule

OPNAVNOTE 4780 - Service Craft and Boats Accounting Report (SABAR)

PERA(CV) INST 4711.1 - Aircraft Carrier Availability Planning Milestone System

SECNAVINST 4855.6 - Navy Quality Deficiency Reporting Program

SECNAVINST 5212.5 - Navy and Marine Corps Records Disposition Manual

SOBT Video SVT-GT-9336 - Submarine Preservation

SPCCINST 4355.5 - Receipt, Inspection, Storage and Issue of Level I/SUBSAFE Material

SPCCINST 4440.376 - Supply Policies and Procedures for Naval Reactor Plant Parts and Material

SPCCINST 4440.437 - Submarine Antenna Quality Assured Material

SPCCINST 4441.170 - COSAL Use and Maintenance Manual

SSN21-081-PMS350L-035 - Rotatable Pool Management Plan For The SEAWOLF Class SSN

SSPINST 4700.1 - Preventive Maintenance Management Program for Fleet Ballistic Missile and Strategic Weapon Systems Equipments and Associated Material

SSPINST 8950.2 - Procedure for Fleet Ballistic Missile (FBM)/Strategic Weapons System (SWS) Components During Flash-Deperm Treatment of an SSBN

SUBMEPP Technical Specification 4730-012-0624 - Submarine Electromagnetic Compatibility (EMC) Survey Manual

Title 10 U.S. Code

(This Page Intentionally Left Blank)